Installation The Main Body
How to install the main body
- Remove dirt and grease from the windshield and attach the electrostatic adsorption sheet to the windshield.
How to use the electrostatic adsorption sheet
Since the adhesive strength is strong on both sides and it is difficult to peel off once it is pasted, it will be troublesome if the pasting position is incorrect. Therefore, the electrostatic adsorption sheet is attached to the windshield. You can easily readjust by sticking the double-sided tape on the mount and peeling it off.
- Peel off the double-sided tape attached to the GPS built-in bracket and attach it on the electrostatic adsorption sheet on the windshield. To strengthen the fixing force, do not attach the main body and leave it for 24 hours or more. Re-sticking may weaken the adhesive strength of the tape and cause it to fall off.
- Insert the attached cigar plug cord into the jack of the main body and the cigar lighter socket of the vehicle. Connect the cigar plug cord connector in the correct orientation. Connecting in the wrong direction may cause malfunction or damage. If you cannot connect successfully, check the connection part carefully before connecting.
